• <ruby id="5koa6"></ruby>
    <ruby id="5koa6"><option id="5koa6"><thead id="5koa6"></thead></option></ruby>

    <progress id="5koa6"></progress>

  • <strong id="5koa6"></strong>
    • 軟件測試技術
    • 軟件測試博客
    • 軟件測試視頻
    • 開源軟件測試技術
    • 軟件測試論壇
    • 軟件測試沙龍
    • 軟件測試資料下載
    • 軟件測試雜志
    • 軟件測試人才招聘
      暫時沒有公告

    字號: | 推薦給好友 上一篇 | 下一篇

    升級cvsup過程中的問題

    發布: 2007-6-09 13:34 | 作者: seanhe | 來源: | 查看: 26次 | 進入軟件測試論壇討論

    領測軟件測試網

    cd /usr/port
    make search name=cvsup

    升級時查找cvsup的位置和信息。

    cd /usr/ports.net/cvsup-without-gui
    make install
    安裝完以后rehash一下。

    過程中出現錯誤:cd .. &&  /bin/sh /usr/ports/converters/libiconv/work/libiconv-1.9.1/autoconf/missing --run automake-1.7 --gnits  srclib/Makefile
    automake-1.7: not found
    WARNING: `automake-1.7' is needed, and you do not seem to have it handy on your
             system.  You might have modified some files without having the
             proper tools for further handling them.  Check the `README' file,
             it often tells you about the needed prerequirements for installing
             this package.  You may also peek at any GNU archive site, in case
             some other package would contain this missing `automake-1.7' program.
    *** Error code 1

    Stop in /usr/ports/converters/libiconv/work/libiconv-1.9.1/srclib.
    *** Error code 1

    cd /usr/port
    make search name=cvsup

    升級時查找cvsup的位置和信息。

    cd /usr/ports/net/cvsup-without-gui
    make install
    安裝完以后rehash一下。

    過程中出現錯誤:cd .. &&  /bin/sh /usr/ports/converters/libiconv/work/libiconv-1.9.1/autoconf/missing --run automake-1.7 --gnits  srclib/Makefile
    automake-1.7: not found
    WARNING: `automake-1.7' is needed, and you do not seem to have it handy on your
             system.  You might have modified some files without having the
             proper tools for further handling them.  Check the `README' file,
             it often tells you about the needed prerequirements for installing
             this package.  You may also peek at any GNU archive site, in case
             some other package would contain this missing `automake-1.7' program.
    *** Error code 1

    Stop in /usr/ports/converters/libiconv/work/libiconv-1.9.1/srclib.
    *** Error code 1

    。。。。。。。

    改升級automake-1.7

    make search name="automake-1.7"

    make install

    web# cd /usr/ports/
    web# make search name="automake-1.7"
    Port:   automake-1.7.5_1
    Path:   /usr/ports/devel/automake17
    Info:   GNU automake generates input files for GNU autoconf
    Maint:  ade@FreeBSD.org
    Index:  devel
    B-deps: autoconf-2.57 m4-1.4_1 perl-5.6.1_15
    R-deps: autoconf-2.57 m4-1.4_1 perl-5.6.1_15

    升級

    web# cd devel/automake
    web# make install
    ===>  Extracting for automake-1.5,1
    >> Checksum mismatch for automake-1.5.tar.gz.
    ===>  Refetch for 1 more times files: automake-1.5.tar.gz
    >> automake-1.5.tar.gz doesn't seem to exist in /usr/ports/distfiles/.
    >> Attempting to fetch from http://www.gtlib.cc.gatech.edu/pub/gnu/automake/.
    fetch: http://www.gtlib.cc.gatech.edu/pub/gnu/automake/automake-1.5.tar.gz: Not Found

    發現版本比較底,并且無法安裝(Check your system clock,時間錯誤),再找高版本,想用wget下載,發現無wget命令,安裝wget,發現版本又比較低

    準備升級內核。

    延伸閱讀

    文章來源于領測軟件測試網 http://www.kjueaiud.com/


    關于領測軟件測試網 | 領測軟件測試網合作伙伴 | 廣告服務 | 投稿指南 | 聯系我們 | 網站地圖 | 友情鏈接
    版權所有(C) 2003-2010 TestAge(領測軟件測試網)|領測國際科技(北京)有限公司|軟件測試工程師培訓網 All Rights Reserved
    北京市海淀區中關村南大街9號北京理工科技大廈1402室 京ICP備10010545號-5
    技術支持和業務聯系:info@testage.com.cn 電話:010-51297073

    軟件測試 | 領測國際ISTQBISTQB官網TMMiTMMi認證國際軟件測試工程師認證領測軟件測試網

    老湿亚洲永久精品ww47香蕉图片_日韩欧美中文字幕北美法律_国产AV永久无码天堂影院_久久婷婷综合色丁香五月

  • <ruby id="5koa6"></ruby>
    <ruby id="5koa6"><option id="5koa6"><thead id="5koa6"></thead></option></ruby>

    <progress id="5koa6"></progress>

  • <strong id="5koa6"></strong>