源代碼如下：
窗體中的代碼：
Option Explicit
´開始
Private Sub Command1_Click()
On Error Resume Next
With myThreadleft
.Initialize AddressOf Fillleft ´傳遞過程地址給線程
.ThreadEnabled = True
End With
With myThreadright
.Initialize AddressOf Fillright
.ThreadEnabled = True
End With
With myThreadbottom
.Initialize AddressOf Fillbottom
.ThreadEnabled = True
End With
MsgBox "多線程正在運行...，看看圖片框控件的變色效果！", 64, "信息"
´終止線程運行
Set myThreadleft = Nothing
Set myThreadright = Nothing
Set myThreadbottom = Nothing
End Sub
´結束
Private Sub Command2_Click()
Unload Me
End Sub
模塊中的代碼：
Option Explicit
´時間計數API
Private Declare Function GetTickCount Lib "kernel32" () As Long
´聲明cls_thread類的對象變量
Public myThreadleft As New cls_thread, myThreadright As New cls_thread, myThreadbottom As New cls_thread
Sub Main()
Load Form1
Form1.Show
End Sub
Public Sub Fillleft()
Static Bkgcolor As Long
Dim LongTick As Long, Longcounter As Long
On Error Resume Next
For Longcounter = 0 To 3000
DoEvents
Bkgcolor = Longcounter Mod 256
Form1.Picture1.BackColor = RGB(Bkgcolor, 0, 0)
LongTick = GetTickCount
While GetTickCount - LongTick < 10 ´延時10毫秒,下同
Wend
Next
Set myThreadleft = Nothing ´如果循環結束則終止當前線程運行，下同
End Sub
Public Sub Fillright()
Static Bkgcolor As Long
Dim LongTickValue As Long, Longcounter As Long
On Error Resume Next
For Longcounter = 0 To 3000
DoEvents
Bkgcolor = Longcounter Mod 256
Form1.Picture2.BackColor = RGB(0, Bkgcolor, 0)
LongTickValue = GetTickCount
While GetTickCount - LongTickValue < 10
Wend
Next
Set myThreadright = Nothing
End Sub
Public Sub Fillbottom()
Static Bkgcolor As Long
Dim LongTick As Long, Longcounter As Long
On Error Resume Next
For Longcounter = 0 To 3000
DoEvents
Bkgcolor = Longcounter Mod 256
Form1.Picture3.BackColor = RGB(0, 0, Bkgcolor)
LongTick = GetTickCount
While GetTickCount - LongTick < 10
Wend
Next
Set myThreadright = Nothing
End Sub
類模塊中的代碼：
´功能：創建多線程類，用于初始化線程。 類名：cls_Thread
´參數：LongPointFunction 用于接收主調過程傳遞過來的函數地址值
´調用方法：1.聲明線程類對象變量 Dim mythread as cls_Thread
´ 2.調用形式：With mythread
´ .Initialize AddressOf 自定義過程或函數名 ´(初始化線程) .
´ .ThreadEnabled = True ´(設置線程是否激活)
´ End With
´ 3.終止調用： Set mythread = Nothing
´ Crate By : 陳宇 On 2004.5.10 Copyright(C).Ldt By CY-soft 2001--2004
´ Email:4y4ycoco@163.com
´ Test On： VB6.0+Win98 AND VB6.0+WinXP It´s Pass ！
Option Explicit
´創建線程API
´此API經過改造，lpThreadAttributes改為Any型，lpStartAddress改為傳值引用：
´因為函數的入口地址由形參變量傳遞，如果用傳址那將傳遞形參變量的地址而不是函數的入口地址
Private Declare Function CreateThread Lib "kernel32" (ByVal lpThreadAttributes As Any, ByVal dwStackSize As Long, ByVal lpStartAddress As Long, lpParameter As Any, ByVal dwCreationFlags As Long, LpthreadId As Long) As Long
´終止線程API
Private Declare Function TerminateThread Lib "kernel32" (ByVal hThread As Long, ByVal dwExitCode As Long) As Long
´激活線程API
Private Declare Function ResumeThread Lib "kernel32" (ByVal hThread As Long) As Long
´掛起線程API
Private Declare Function SuspendThread Lib "kernel32" (ByVal hThread As Long) As Long
Private Const CREATE_SUSPENDED = &H4 ´線程掛起常量
´自定義線程結構類型
Private Type udtThread
Handle As Long
Enabled As Boolean
End Type
Private meTheard As udtThread
´初始化線程
Public Sub Initialize(ByVal LongPointFunction As Long)
Dim LongStackSize As Long, LongCreationFlags As Long, LpthreadId As Long, LongNull As Long
On Error Resume Next
LongNull = 0
LongStackSize = 0
LongCreationFlags = CREATE_SUSPENDED ´創建線程后先掛起，由程序激活線程
´創建線程并返線程句柄
meTheard.Handle = CreateThread(LongNull, LongStackSize, ByVal LongPointFunction, LongNull, LongCreationFlags, LpthreadId)
If meTheard.Handle = LongNull Then
MsgBox "線程創建失��！", 48, "錯誤"
End If
End Sub
´獲取線程是否激活屬性
Public Property Get ThreadEnabled() As Boolean
On Error Resume Next
Enabled = meTheard.Enabled
End Property
´設置線程是否激活屬性
Public Property Let ThreadEnabled(ByVal Newvalue As Boolean)
On Error Resume Next
´若激活線程（Newvalue為真）設為TRUE且此線程原來沒有激活時激活此線程
If Newvalue And (Not meTheard.Enabled) Then
ResumeThread meTheard.Handle
meTheard.Enabled = True
Else ´若激活線程（Newvalue為真）且此線程原來已激活則掛起此線程
If meTheard.Enabled Then
SuspendThread meTheard.Handle
meTheard.Enabled = False
End If
End If
End Property
´終止線程事件
Private Sub Class_Terminate()
On Error Resume Next
Call TerminateThread(meTheard.Handle, 0)
End Sub
總結：
本程序的缺點是程序運行時CPU占用率高。
至此全部源代碼結束，在實例的基礎上可以根據個人需要做出不同的多線程應用程序，可以用此類模塊創建ActiveX DLL，然后引用這個DLL來進行調用。希望對大家有用，若大家找到一種更好的實現方法且CPU占用率低的程序請通知我，程序中有什么Bug請Email，謝謝。
文章來源于領測軟件測試網 http://www.kjueaiud.com/
