看人家用使用InstallShield制作ASP安裝程序(1)

我現在在做ASP的安裝程序，這樣可以方便用戶的使用。我使用的InstallShield版本是InstallShield Professional—Standard Edition6.3。
我沒有用過這個東東，問題如下：

問題一
通過Project Wizard-generated script 做好了COPY打包工作?？墒?.3版本的好象不支持主體Program...Endprogram，因為我看COPY打包的Script腳本就是通過兩個Fuction實現的。所以我的腳本加不進去，除非在這兩個Fuction中調用！請問是不是6.3版本不能使用Program...Endprogram，如果可以使用的話，應該如何去用？

問題二
想在COPY完ASP程序后直接實現IIS的設置，也就是通過安裝程序就可以完成，不需要手動設置，請問怎樣去實現呢？

以下就是我用Project Wizard-generated script 做好的兩個Fuction，他們不用調用也不用聲明定義就自動執行，真是搞不懂呀！我的Script該加在什么地方呢？
// Include header files

#include "ifx.h"
function OnFirstUIBefore()
number nResult,nSetupType;
string szTitle, szMsg;
string szLicenseFile, szQuestion;
string szName, szCompany, szSerial;
string szTargetPath;
string szDir;
string szComponents, szTargetdir;
number nLevel;
LIST listStartCopy;
number nvSize;
begin
nSetupType = TYPICAL;
TARGETDIR = "C:"^"inetpub" ^"wwwroot" ^@PRODUCT_NAME;
szDir = TARGETDIR;
szName = "";
szCompany = "";
szSerial = "";

Dlg_Start:
// beginning of dialogs label

Dlg_SdWelcome:
szTitle = "";
szMsg = "";
nResult = SdWelcome( szTitle, szMsg );
if (nResult = BACK) goto Dlg_Start;

Dlg_SdLicense:
szLicenseFile = SUPPORTDIR ^ "license.txt";
szTitle = "";
szMsg = "";
szQuestion = "";
nResult = SdLicense( szTitle, szMsg, szQuestion, szLicenseFile );
if (nResult = BACK) goto Dlg_SdWelcome;

Dlg_SdRegisterUserEx:
szMsg = "";
szTitle = "";
nResult = SdRegisterUserEx( szTitle, szMsg, szName, szCompany, szSerial );
if (nResult = BACK) goto Dlg_SdLicense;

Dlg_SdAskDestPath:
szTitle = "";
szMsg = "please select setup folder";
nResult = SdAskDestPath( szTitle, szMsg, szDir, 0 );
TARGETDIR = szDir;
if (nResult = BACK) goto Dlg_SdRegisterUserEx;

Dlg_SetupType:
szTitle = "";
szMsg = "";
nResult = SetupType ( szTitle , szMsg , "" , nSetupType , 0 );
if (nResult = BACK) then
goto Dlg_SdAskDestPath;
else
nSetupType = nResult;
if (nSetupType != CUSTOM) then
szTargetPath = TARGETDIR;
nvSize = 0;
ComponentCompareSizeRequired(MEDIA,szTargetPath,nvSize);
if (nvSize != 0) then
MessageBox( szSdStr_NotEnoughSpace, WARNING );
goto Dlg_SetupType;
endif;
endif;
endif;

Dlg_SdComponentTree:
if ((nResult = BACK) && (nSetupType != CUSTOM)) goto Dlg_SetupType;
szTitle = "";
szMsg = "";
szTargetdir = TARGETDIR;
szComponents = "";
nLevel = 2;
if (nSetupType = CUSTOM) then
nResult = SdComponentTree(szTitle, szMsg, szTargetdir, szComponents, nLevel);
if (nResult = BACK) goto Dlg_SetupType;
endif;

Dlg_ObjDialogs:
nResult = ShowObjWizardPages(nResult);
if (nResult = BACK) goto Dlg_SdComponentTree;

Dlg_SdStartCopy:
szTitle = "";
szMsg = "";
listStartCopy = ListCreate( STRINGLIST );
nResult = SdStartCopy( szTitle, szMsg, listStartCopy );
ListDestroy(listStartCopy);
if (nResult = BACK) goto Dlg_ObjDialogs;

// setup default status
SetStatusWindow(0, "");
Enable(STATUSEX);
StatusUpdate(ON, 100);
return 0;
end;

///////////////////////////////////////////////////////////////////////////////
//
// FUNCTION: OnMoving
//
// EVENT: Moving event is sent when file transfer is started as a result of
// ComponentTransferData call, before any file transfer operations
// are performed.
//
///////////////////////////////////////////////////////////////////////////////
function OnMoving()
string szAppPath;
begin
szAppPath = TARGETDIR;
RegDBSetItem(REGDB_APPPATH, szAppPath);
RegDBSetItem(REGDB_APPPATH_DEFAULT, szAppPath ^ @PRODUCT_KEY);
end;
// --- include script file section ---

原文轉自：http://www.kjueaiud.com